to program a Ground EFX metal detector, particularly the Swarm MX100E, follow these steps based on the features and specifications of the device:
Programming Steps for Ground EFX MX100E
Powering On
Turn on the metal detector by pressing the power button, usually located on the control panel.
Adjusting the Length
Use the rapid adjustment feature to set the length of the rod to a comfortable height. This typically involves loosening a knob, adjusting the rod, and then tightening it back in place.
Selecting Search Modes
The MX100E offers three modes:
All Metal: Detects all types of metal.
Coins: Filters out unwanted metals and focuses on coins.
Jewelry: Targets jewelry items specifically.
Cycle through these modes using the mode button until you reach your desired setting.
Setting Discrimination Levels
The detector has 8 categories of metals that can be discriminated against. Use the discrimination knob or buttons to adjust which types of metals you want to ignore (e.g., iron, aluminum).
Ground Balance Adjustment
The MX100E features an Automatic Ground Grab function that helps balance the detector for different soil types. Activate this function by pressing the designated button and moving the coil up and down a few times over the ground until it stabilizes.
Adjusting Sensitivity
Depending on your environment (e.g., mineralized soil), you may need to adjust the sensitivity settings. Higher sensitivity can detect smaller targets but may pick up more noise from ground minerals.
Audio Tones and Volume
The detector produces four distinct audio tones based on metal type. Adjust the volume using the volume control knob to ensure you can hear signals clearly.
Pinpoint Mode
To locate a target more precisely, switch to pinpoint mode if available. This mode helps you focus on where exactly to dig.
Using Headphones
If you prefer using headphones, plug them into the 3.5mm jack provided on the detector for a more private detecting experience.
Testing Your Setup
Before heading out, test your settings by waving known metal objects (like coins or jewelry) in front of the coil to ensure that your detector is responding correctly.
These steps will help you effectively program and use your Ground EFX MX100E metal detector for optimal performance in finding various metal objects, including gold and silver. Always refer to your user manual for specific details related to your model, as features may vary slightly between different detectors.
