Main menu

Pages

Fisher C-21-10 operates on VLF technology

 

Fisher C-21-10 operates on VLF technology


The Fisher C-21-10 operates on VLF technology, which is a rarity for underwater metal detectors capable of withstanding a dive of more than 5 meters (fisher C-21-10 dive - up to 76 meters), which sets it apart among the deep underwater metal detectors of other manufacturers that operate on PI (pulse) technology.


Choosing the frequency of the metal detector allows the user to adjust the device to their tasks:

- at 5 kHz is wider than the search radius and large objects are better identified;

- at 15 kHz - detailed search for small targets (rings, coins, earrings, gold nuggets).


Fisher C-21-10 is recommended for search in high-mineralized water/soil, perfectly coping with the task of finding metal in the harshest conditions, when the degree of soil mineralization is off the scale, also works steadily in fresh water.


Fisher C-21-10 specifications


Operating frequencies: 5kHz and 15kHz

How it works: VLF

Dive up to 76 meters under water

Discrimination: consistent (with segments excluded sequentially, starting with iron)

Dynamic Target Identification Mode

3 - tonal sound identification of the type of target

Setting up sensitivity, adjusting the volume of the sound

PinPoint TargetPoint AccurateLy Definition Mode

Warning of a big goal

Super-deep mode "All metals"

High resistance to mineralization (patented Fourier Domain signal processing technology for salt water)

Fast manual ground balancing

Manual adjustment of the threshold tone

Waterproof 10.5 inch coil, mono

Battery check

Power - 4 9B batteries (35 hours of continuous operation)

Several ways to fasten a metal detector, thanks to several rods and straps, going in the set.

Weight - 2.8 kg


Management of The Fisher C-21-10


The underwater metal detector is controlled by several regulators located on the control unit, there is no LCD display. Target identification is due to sound tone at 3 different heights.


Search modes for Fisher C-21-10:


1) "Discrimination" and discrimination is carried out consistently, it cuts off metals by the degree of their currentity from low to high.  The setting of discrimination is carried out by the turn of the regulator (Disc) from 0 to 6, consistently, one by one excluding targets from unwanted metal, from black metal (iron) to non-ferrous (aluminium, copper, silver, gold). 

2) "All metals" (with a threshold tone) - metal detector sees all metals

3) "Pinpoint" - an accurate definition of the center of the target, works in static mode (the coil is aimed at the target and does not move). 


Fisher's Guarantee C-21-10

5 years on the block and 1 year on the reel


Metal detector Fisher C-21-10


Instructions in language

Headphones

Battery/battery kit.

table of contents title